When using the through shot blasting machine, we are very concerned about the power situation and power consumption. There are also some workpiece sizes involved in the operation process. Few people pay attention to its noise level, but the noise level is also very important, especially for enterprises in the first tier cities. The factory is usually noisy, and it is easy to be investigated and dealt with by the environmental protection department. In fact, it is also very troublesome. Therefore, when we purchase through shot blasting machine, we suggest that you still understand its noise level. How about the noise of H-beam passing shot blasting machine?

1: Noise profile of the equipment

Generally speaking, the operation noise of H-beam through shot blasting machine produced by regular manufacturers is less than or equal to 90 dB, which is acceptable. However, if the quality of products produced by some manufacturers is not high, the noise may be relatively large.

2: Abnormal noise of H-beam through shot blasting machine should not be underestimated

we must remind you that if we find that the noise of the product is obviously larger than the normal noise during use, it will prove that there may be some faults in the product. In order to avoid this kind of fault, we suggest that we should check in advance to see where there is a problem. If some parts of the product are loose, Or some vulnerable parts appear relatively large wear, will affect its transmission, and then affect its noise problem, so if in the actual use of the process of its noise than usual, we must be vigilant, but also to adopt the correct way to deal with, abnormal noise is best to negotiate with the manufacturer.