The working principle of floor shot blasting machine: pellet is a mechanical method of throwing pellets (balls or sand particles) on the working surface at a high speed and a certain angle, allowing the pellets to impact the working surface to reach the surface of the projectile and remove the residue. At the same time, the negative pressure produced by the dust collector will remove the pellets and clean them down. After the cleaning of impurities and dust, the intact pellets will be automatically recycled, and the impurities and dust will fall into the dust box.

Main performance characteristics of floor shot blasting machine:

The main components are components (Qingdao square permanent motor, soft starter, frequency converter, imported high speed bearing,); the related parts of the shot blasting chamber are used to ensure that the service life of the shot blasting chamber is equivalent to the imported product; the vulnerable parts such as throwing head and directional sleeve are casting with wear-resistant material, and the life is close to the imported part.

The role of the floor shot blasting machine:

1, clean and thoroughly remove the surface slurry and sand layer.

2, the pores of concrete surface can be completely opened, so that sealant or binder can be completely infiltrated into concrete.

3,The defects of concrete can be exposed in advance.

4, get rough, uniform and clean surface, good skid resistance, greatly increased the interlaminar shear strength and bonding strength.