When using the sand blasting machine, if you do not pay attention to the maintenance of the sand blasting machine, it may reduce the life of the blasting machine. It may even cause safety accident during the usage. Now let’s talk about what should be done. Maintenance of sand blasting machine.

It is necessary to perform a simple maintenance on the blasting machine once a week. The power of the blasting machine should be cut off, the blasting machine should be stopped, and the nozzle of the blasting machine should be removed. If the nozzle of the blasting machine is expanded to a diameter exceeding 1.6. mm or the lining of the nozzle has cracks,itmust be replaced in time. If the sand blasting machine is equipped with a moisture filter, check the filter element regularly and clean the water storage cup.

If there is time, check the sand blasting machine to see how long it takes for the exhaust to stop. If the exhaust time is obviously extended, there may be too much dust in the filter and silencer. Be sure to clean up in time.

In addition to a simple maintenance of the blasting machine every week, the blasting machine should be inspected once a month. When conducting monthly inspections, it is necessary to carefully observe whether the wear and aging phenomenon occurs in every part of the sand blasting machine. If these phenomena can be cleaned up in time, they should be cleaned up in timeand replacethe parts when necessary.

In short, regular maintenance of the blasting machine must be carried out, including the pneumatic remote control system. These safety devices must also be checked regularly. Only regular inspection of these parts will ensure that the blasting machine will be relatively safe at every use, without any safety incidents, and the controller will not malfunction. However, before servicing the blasting machine, the compressed air inside the blasting machine must be cleaned first to close the air valve, and hang the safety sign.