The track type shot blasting machine uses a high-strength wear-resistant rubber track or a manganese steel track to load the workpiece. The shot blasting machine uses the high-speed rotating impeller to throw the pellets onto the workpiece to be cleaned in the chamber to achieve the purpose of cleaning.

The inner and outer wall shot blasting machine of the steel pipe is a shot blasting machine for cleaning and spraying the steel pipe by shot blasting. The shot blasting machine mainly removes sand, rust, welding slag, scale and debris from the surface and inner cavity of the steel pipe. The surface of the steel pipe is increased in adhesion and the smoothness of the workpiece is increased, the corrosion resistance and fatigue resistance of the steel pipe are increased, and the service life of the steel pipe is prolonged.

Shot blasting machine centrifugal grinding method: When the ordinary rotary grinding machine rotates at high speed, its substance (mixture) will surround the grinding groove, and there is no relative movement between the workpiece and the grinding stone, so there is no relative motion difference. The effect will be weak. However, a few grinding grooves are equidistantly mounted on the rotary shaft of the turret head disc, and then the planetary rotary motion is applied to give sufficient centrifugal force,

There are many ways in which we clean up the markings of municipal roads and highways. They can usually be divided into chiseling, sanding, sandblasting and shot blasting. The most common construction methods are generally sandblasting with a sandblasting machine and shot blasting on the road surface using a shot blasting machine. In essence, the two methods are indistinguishable, the difference lies in the recovery and separation of the source of the pellets used and the dirt and dust after cleaning.

The daily maintenance of the road shot blasting machine is good for both the normal use of the machine and the safety of the operator. Therefore, after the road shot blasting machine is put into production, it must be maintained according to an effective pace. Here is a simple explanation for the 6-point nursery of the road shot blasting machine:

Regularly check the shot blasting machine to clean the interior of the room, the inner wall lining, and replace it immediately after wear.

The blasting machine screw is composed of a geared motor, a seated bearing, a spiral body, a frame, and a pulse system. The reason why the spiral does not rotate is as follows:

​The Faster Blaster is the only machine on the market that can blast clean both vertical and horizontal surfaces and pipe. The system is used throughout the world for cleaning water tanks, petro chemical tanks, wind tower sections, plate and pipe.

The surface treatment work for oil tank and large construction before painting is quite heavy and it will cost too much to do surface cleaning with original cleaning type. But now, there is a good news to tell you, vertical oil tank surface cleaning equipment faster blaster 32 can help us solve this problem perfectly.

Vertical oil tank surface cleaning equipment faster blaster 32 depends on the negative pressure generated by the fan on the dust collector and the magnetic drive firmly adsorbed on the surface of the tank, the surface of the tank can be cleaned efficiently through the automatic control system, which can be operated by only one person.

Offshore platform dustless blasting equipment removes the toughest coatings faster than sand blasting, but without the dust plume. The system works by mixing abrasive and water together inside the blast tank. The water not only adds mass and energy to the blast, but also traps the abrasive and coating being removed, preventing them from becoming airborne. offshore platform dustless blasting equipment reduces the need for containment, while making it easier to blast shipyard, oil tank, drilling platform and so on.