The spraying and polishing of the radiator are very important aspects in the pre-treatment process, because it directly affects the later production process and also affects the life of the radiator.

Floor shot blasting machine is a kind of equipment specially used for road cleaning. It can increase the friction coefficient of the road surface and improve the anti-sliding performance. There are six main applications:

The shot blasting machine is widely used in the surface treatment of casting and heat treatment, but the shot blasting process is a complicated process. It must take into account the influence of various important factors at different positions on the shot blasting of the workpiece. The impact of the pill machine is particularly serious.

Although the crawler type shot blasting machine is a small shot blasting machine in the shot blasting machine industry, it has a small footprint, but it has great practicability, a higher frequency of use, and long-term operation, which is easy to generate a considerable load on the shot blasting machine. So how do you use a track-type shot blasting machine? Do the following to increase the machine service life.

1. Annual maintenance:
(1) Overhaul all motor bearings;
(2) Check the lubrication of all bearings and add new grease: check the corrosion of the air duct of the cylinder and the oil accumulation on the inner wall. If the corrosion is serious, replace it. If there is more oil, clean it;

The structure is afraid of water leakage, because the water seepage will cause the concrete to loosen, fall off, and the steel is corroded. One of the reasons for the water seepage is that the treatment of the concrete surface layer does not completely remove the surface residual material, and does not retain a certain rough surface to ensure waterproof.

Bridge deck pavement is an important part of pavement. Bridge deck pavement is also a common problem of early damage. This requires strengthening the adhesion between pavement and bridge deck, so pavement shot blasting machine is designed and manufactured by us. Strengthen the deck.

The shot blasting machine is a new technology that impacts the steel sand steel pill on the surface of the material by the blasting machine. It runs faster and better than other machines, and the output increases faster. The shot blasting machine is in the industry. Have a certain good reputation. The shot blasting machine has a wide range of applications, such as the removal of burrs and rust. These conditions may not maintain the integrity of the removed objects, and the appearance and aesthetics may have such an effect.

What problems should be paid attention to when paving shot blasting machine is used in bridge deck construction?
The quality of the deck surface should meet the specifications or design requirements.