The Q37 hook type shot blasting machine is a new type of small structure cleaning machine, which has the following characteristics: it is designed and tried successfully on the basis of the universal market forecast and the needs of the vast number of users in China.

The hanging chain ball cleaning machine is suitable for the cleaning of small cast iron, steel castings, forgings and stamping parts. It is especially suitable for forgings and cleaning of castings to remove the sticky sand, rust, oxide skin and dirt on the surface of the workpiece, to make the surface of the workpiece metal present, eliminate the internal stress of the workpiece and improve the fatigue resistance of the workpiece. It can increase the adhesion of the paint when the workpiece is jet, and ultimately achieve the purpose of improving the surface quality of the workpiece.

Use cautions:
It is prone to foreign matter on the screen of the sand separator, so it needs to be checked and cleaned frequently. If it is found that the screen has obvious wear, it should be replaced in time.
There are some bullets scattered around the equipment often, and they need to be cleaned frequently to prevent someone from accidentally stepping on and getting injured.
The foot nut of the chamber body also needs to be checked frequently. If it is loose, it should be reinforced in time.

When using the sand blasting machine, if you do not pay attention to the maintenance of the sand blasting machine, it may reduce the life of the blasting machine. It may even cause safety accident during the usage. Now let’s talk about what should be done. Maintenance of sand blasting machine.

Mechanical cleaning is not the same as cleaning in our daily life. Mechanical cleaning requires attention to certain safety while paying attention to cleanliness. The shot blasting machine is a high-efficiency and multi-functional cleaning machine developed for better mechanical cleaning, and the machine is convenient and safe to use and has a particularly long service life.

The lifting belt is used as a transmission belt for carrying loads, and its performance requirements are quite different from those of conventional conveyor belts in fabric core layer selection and rubber formulation. In addition to having sufficient warp and weft tensile strength, the lifting belt should also have:

As we all know, the oil tanks should be cleaned every 8 years. The cleaning of the oil tanks will affect the quality of the oil. Untreated oil tanks will cause blockage, scaling and corrosion, and the oil will be low quality, which will easily cause oil tanks. Due to corrosion leakage, crude oil pollution, etc.

The treatment of roadbed waterproof construction subgrade is one of the important factors that directly affect the quality of the waterproof layer of the roadway and the quality of the asphalt pavement above the waterproof layer. In recent years, it has been increasingly researched and designed by emphasis on construction, management and maintenance. Today we introduce the most advanced shot blasting process.

The shot blasting machine is used to remove the oxide scale on the surface of the casting and to remove the sand on the surface of the casting. It is indispensable for improving the casting quality. After the workpiece is produced, it is necessary to use this equipment to strengthen the workpiece. Before the shell of the large equipment is inspected, it needs to be cleaned by strict shot blasting to ensure the reliability of the flaw detection result of the large equipment. .

Epoxy floor paint is a particularly beautiful and long-lasting floor paint. It uses an integral polymer surface layer called epoxy floor paint. Before laying epoxy floor paint, it needs to use epoxy floor shot blasting machine to clean and roughen the floor. The surface is shot blasted to remove surface cement slurry, old paint and adhering garbage, and improve the adhesion of the floor paint and concrete surface.