The shot blasting machine used for aluminum alloy parts (colored metal parts) and ferrous metal parts is basically the same in terms of structure, and the working principle is also consistent. However, since the aluminum alloy is usually small in size and light in weight, the particle size used for cleaning is small, and the generated aluminum powder is easily exploded. Therefore, the shot blasting machine used for the ferrous metal parts has the following differences.

What is the reason why the castings are blackened and peeled after being treated by a shot blasting machine? Here today we specifically answer the analysis of the reasons for the blackening of the casting after the shot blasting, I hope to help everyone.

Hook type shot blasting machine will inevitably encounter a series of problems during use, which will cause the equipment to be suspended, but some of these problems can be solved quickly:

Recently, it has been learned from the feedback from customers that many use of shot blasting machines ignores the use of shot blasting machine accessories, resulting in excessive loss and breakage of the parts, resulting in the inability of the machine to operate and causing unnecessary losses to the company. Ten thousand can not be underestimated the role of shot blasting machine accessories, the quality of the accessories in the shot blasting machine can be related to the overall quality of the shot blasting machine. When using the shot blasting machine, paying more attention to the fittings is equivalent to extending the blasting in disguise. Machine life and shot blast quality. Thereby controlling the production cost of the enterprise and improving the existence value of the shot blasting machine.

Shot blasting is the most important step in preparing the surface for a new seamless floor. This is especially true when the substrate is heavily damaged, deeply contaminated or has failing or inappropriate coatings for the intended usage. Shot blasting removes old floor coatings and the contaminants within the top surface layer. It increases the concrete surface profile (CSP) area up to three times the original surface area, paving the way for the new flooring installation to have improved application and stronger adhesion bond.

The application of shot peening technology can effectively improve and improve the fatigue life and corrosion resistance of automotive parts. At present, many automakers and component manufacturers around the world have already put shot peening into the standard production process. At the same time, the strengthening equipment has gradually formed a complete modern manufacturing line like other manufacturing equipment.

The new equipment was just put into use and the product began to run in. The faults that may occur during the running-in period are more complicated, and the causes may be various, such as selection problems, design and manufacturing problems, or installation and environmental problems. If the torque is chosen too small, it may affect the adjustment speed of the wind turbine tower shot blasting machine.

In the modernized industrialized mechanized society, the effect of shot blasting machine is more and more extensive. The shot blasting machine is mainly used to clean large-scale production machines and casting machines, and also has certain derusting, grinding and refurbishing. effect. Nowadays, production is generally completed by mechanization, and the number of labor is getting less and less. As long as the production machinery is well maintained, the production task can be completed efficiently.

The crawler shot blasting machine should clean the machine after each shift after work.

The crawler shot blasting machine is a very widely used shot blasting machine, also known as a crawler type shot blasting machine. The equipment uses a rotating impeller to throw the pellets at high speed on the workpiece to be cleaned inside the chamber. , to achieve the purpose of cleaning, and the equipment uses a new, high-efficiency blasting machine, rubber roller to evenly reduce the collision of the workpiece being cleaned, the cleaning effect is even and meticulous, and the material can be automatically unloaded after the work is completed.